We use cookies (ours and those of third-party providers, e.g. Google Analytics) to simplify the use of our web pages and adjust the content more closely to your interests. Simply continuing to use our web pages sets only those cookies that are required for technical reasons; acceptance means that all cookies (including marketing cookies) will be set. Your consent is voluntary, and can be withdrawn at any time with future effect.

For further information, see our data protection statement.

Accept

ARION 640-620 C

Engine and transmission.

Your CLAAS machine is much more than the sum of its individual parts. Top performance is only possible when all the parts are ideally matched and work together optimally.

ARION 600 C

ARION 640-620 C

Engine and transmission.

Your CLAAS machine is much more than the sum of its individual parts. Top performance is only possible when all the parts are ideally matched and work together optimally.

Engine and transmission.

Power wherever it's needed.

Four hydraulically controlled ranges.

You don't need a shift lever or clutch pedal to operate the ARION 600 C. Just touch the buttons on the hand throttle with your fingertips to shift effortlessly through all four powershift speeds and ranges.

Our engineers are continuously developing solutions to help make your work even more efficient, reliable and cost-effective than before. State-of-the art 6.8-l-6 cylinder engines with turbocharger provide the ARION 600 C with impressive torque and enormous torque increase.

ARION 600 C

Engine and transmission.

  • 6.8-l-6-cylinder from 145 to 165 hp (ECE R 120): strong pulling power even at low speeds
  • Electronic common rail injection system: the right amount of diesel at the right time
  • QUADRISHIFT transmission with four powershift speeds: the right gear for every situation
  • REVERSHIFT electrohydraulic clutchless reverser: for easy, rapid turning manoeuvres
  • 24-gear creep gear from 460 m/h: especially useful for horticultural work
  1. Creep gears
  2. four hydraulically controlled ranges
  1. REVERSHIFT clutchless reverser
  2. QUADRISHIFT: four powershift speeds
ARION 600 C

Four powershift speeds save you having to shift between ranges in many cases.

ARION 600 C

Operate the REVERSHIFT clutchless reverser with your fingertips.

ARION 600 C

Construction. Designed for long, hard days

Uniform weight distribution for maximum tractive power and stability.

You need a reliable tractor on your farm that can pull anything and remain stable. Two factors are crucial to this: the wheelbase and the weight distribution. The ARION 600 C features a long wheelbase of 2.82 m and almost equal weight distribution, with 53% at the front and 47% at the rear. This delivers the impressive tractive power and stability that make the ARION range so popular.

ARION 600 C

The tight turning radius saves valuable centimetres and precious time.

ARION 600 C

Short overall length ensures excellent manoeuvrability.

ARION 600 C

Intelligent weight distribution guarantees stability and tractive power.

ARION 600 C

Construction.

  • Turning radius of just 4.85 m: steering lock up to 55° for outstanding manoeuvrability
  • Overall length of just 4.72 m: good visibility and short trailer combination on the road
  • Intelligent weight distribution of 53% at the front and 47% at the rear: excellent stability with attached implements
  • Long wheelbase of 2.82 m: unrivalled driving comfort and safe road handling
ARION 600 C

Sufficient power at front and rear.

Powerful hydraulics with two circuits.

When you need to get the job done, you can rely on the ARION 600 C. The hydraulics system has two selectable circuits and up to three auxiliary spool valves. The wide range of hitching options – for example a swinging drawbar or Piton Fix – offers great flexibility.

The rear linkage can handle max. 6.9 t at the ball ends and is digitally controlled. The 98-l hydraulic pump enables you to use a hydraulic spool valve and the rear linkage at the same time. So you can equip your ARION 600 with various implement combinations to increase your work rate and significantly reduce working hours and costs.

The front linkage is fully integrated and equipped with folding lift arms. With reduced spacing between the ball ends and front axle, it is ideal for any task requiring precision ground tracking. In combination with the front PTO shaft, the front linkage offers exceptional versatility.

ARION 600 C

Discover how CLAAS front loaders significantly increase the scope and versatility of your tractor.

With a choice of over 18 models in three series, you'll be ideally equipped whatever the job.

frontloader.claas.com

ARION 600 C

Front and rear linkage.

  • 6.9 t lifting capacity at the rear: the ARION can easily handle your large implements and seed drills
  • TCE 15 T electronic rear linkage control: precision for optimum comfort and high-quality work
  • 98 l/min hydraulic output at the rear: to suit your high-performance attached implements and equipment combinations
  • 540 / 1,000 / ECO (optional) PTO: allows you to cut diesel consumption and noise levels at reduced engine speed
  • Spool valve blocks are easily accessible for quick connection and disconnection
  • 3.8 t lifting capacity at the front: enough power for implements and ballasting
  • 1,000 front PTO: extends your range of applications and saves time and costs

All set for speedy maintenance.

Good accessibility.

Daily maintenance work should be as straightforward as possible – because we know from experience that nobody enjoys doing things that are complicated or inconvenient. With the ARION 600 C, you can access all the relevant areas in no time at all. Engine, air filter, radiator and cab filter are easy to reach. What's more, the ARION 600 C can be refuelled just like a passenger car, and the tank holds a generous 280 litres of fuel.

ARION 600 C
  • The bonnet can be opened in a few simple steps, giving you easy access to all maintenance points
  • Tool-free daily maintenance: perform simple maintenance tasks effortlessly yourself
  • Engine oil change every 500 hours, transmission and hydraulic oil change every 1,500 hours: long maintenance intervals allow you greater operational flexibility
  • PowerCore air filter with coarse dirt particle extraction: save valuable maintenance time during filter cleaning
ARION 600 C

It's easy to check the transmission oil level at the rear.

ARION 600 C

The generously sized air filter is designed for a long service life.

 
Your distributor

JAHED INVESTMENT & SERVICE CO.
FOR RURAL

Corner of Masiri St., Fatemi Sq, Jahad Building No. 5
00000 Tehran
Iran

0098 21 57647501 0098 21 8893019 88326184

ftrade@jis-co.net